C.I.P. NOZZLES HIGH FLOW RATE
Cleaning-in-Place
(C.I.P.) Nozzle – Simple Design or Pneumatic Actuator
The
C.I.P. Nozzle has a retractable design, where the nozzle head, when not
in use, is
flush with the inner
wall of the equipment which
requires to be cleaned (spray
drying chambers, cyclones, fluid beds, tanks, ducts, etc…)
The
retracted position during plant operation ensures no disturbance of
the process, and eliminates product entrapment.
During C.I.P. operation water is pumped to the nozzle under pressure, which forces
the nozzle head into the correct position to clean the plant. The C.I.P. nozzle head is fitted with a spray ring that rotates according to the
feed pressure.
Once the water supplied is stopped, the nozzle head
retracts automatically to its starting position.
Suitable for
mounting on both thin and thick gauge equipment (insulated or
uninsulated).
C.I.P. NOZZLES LOW FLOW RATE
CMT
Developed
a
new compact, simple and cost-effective C.I.P. nozzle with
reduced
Flow rate and
low pressure water required.
This
C.I.P. nozzle provides excellent cleaning effect through a rotating and
homogeneous distribution of the fluid, with only 15 liter/min and 2
bar water pressure.
(C.I.P.)
Nozzle – Simple Design-Low cost – high efficiency
The
C.I.P. Nozzle has a retractable design, where
the nozzle head, when
not in use, is flush with the inner wall of the equipment which
requires to be cleaned (spray
drying chambers, cyclones, fluid beds, tanks, ducts, etc…)
The
retracted position during plant operation ensures no disturbance of
the process, and eliminates product entrapment.
During C.I.P. operation water is pumped to the nozzle under pressure, which forces
the nozzle head into the correct position to clean the plant.
Once
the water supply is stopped, the nozzle head retracts automatically
to its starting position.
Available
with different back connections:
- Triclamp
BSP Reducer
- Hose
barb
- DIN